top of page

Ventflex SRG/SRI - Flexible Ventilation - Semi-rigid - Galvanized Steel or Stainless Steel  

The Ventflex SRG/SRI is a semi-rigid flexible ventilation duct made of galvanized steel or non-insulated stainless steel grade 316L.

Ventflex SRG/SRI

PRODUCT DETAILS

  • Constructed from a single strip of 0.005'' (0.13mm) stainless or galvanized steel, longitudinally profiled for increased durability.

 

  • Equipped with a complex 7-facet seal, guaranteeing perfect sealing at the specified operating pressure.

 

  • Easily bendable to form 90 degree elbows without the need for tools or additional fittings.

 

  • Available in non-standard sizes and lengths up to 50 feet; ovalization service available upon request.

CURVATURE DIAMETER

1-1.5 times the duct diameter.

MATERIALS

Stainless Steel and Galvanized Steel: 3" - 4" - 5" - 5.5" - 5.75" - 6" - 7" - 8"

OVALIZATION SERVICE

Available on request.
Maximum length 50' or custom made accepted.

USES

  • Contaminant control

  • Removal of contaminants in the air

  • Ventilation

 

  • Dehumidification

Available materials
Flame development
Smoke development
Maximum air speed
Positive operating pressure
in continuous mode
Negative operating pressure
in continuous mode
Operating temperature range
Duct wall thickness
Stainless steel
Galvanized steel
<0
<0
4000 fT/min
15" of WC
10" of WC
-70°F to 1000°F
0.005" (0.13mm)

CERTIFICATIONS

logo certification

AREAS OF APPLICATION

DOCUMENTATION

Frequently Asked Questions

What is Ventflex SRG and in what areas of application is it used?

Ventflex SRG is a semi-rigid ventilation duct made of galvanized steel or 316L stainless steel. This product is mainly used in ventilation systems where flexibility and durability are essential, particularly in heating, air conditioning and industrial ventilation installations.

What are the main features of the Ventflex SRG?

The Ventflex SRG is made from a single strip of 0.005'' galvanized or stainless steel, providing high strength and a perfect seal thanks to its complex 7-facet joint. It is easily bendable to form 90 degree bends, without the need for additional fittings.

Is it possible to order the Ventflex SRG in specific sizes or lengths?

Yes, Ventflex SRG is available in standard sizes from 3'' to 8'', and lengths up to 50 feet. Non-standard sizes and lengths can be manufactured upon request. Additionally, an ovalization service is available to meet specific installation needs.

bottom of page