Ventflex ASA - Flexible Ventilation - Semi-rigid Aluminum or Stainless Steel
The Ventflex ASA is a semi-rigid insulated ventilation duct, manufactured in aluminum or 316 stainless steel with thermal insulation R4.2, R6, and R8.4.
PRODUCT DETAILS
-
Manufactured from a single strip of 0.005'' aluminum or stainless steel profiled longitudinally.
-
Complex 7-facet seal ensuring perfect sealing.
-
Reduced coefficient of friction, reducing the energy consumption of the ventilation system.
-
Easily bendable to form 90 degree bends without additional tools.
-
Standard length of 10' (compressed up to 45'' on request).
CURVATURE DIAMETER
1-1.5 times the duct diameter.
MATERIALS
-
Aluminum or stainless steel: 3", 4", 5", 6", 7", 8", 9", 10", 12", 14", 16", 18", 19", 20", 22", 24".
USES
-
Ventilation for heating and cooling systems.
-
Reduction of energy consumption of ventilation systems .
Available materials
Flame development
Smoke development
Maximum air speed
Positive operating pressure
in continuous mode
Negative operating pressure
in continuous mode
Operating temperature range
Aluminum
<25
<50
4000 ft/min
15" of WC
6" of WC
-40°F to 250°F
Thickness of flexible pipe
0.005'' (0.13mm)
Stainless steel
R coefficient of the insulation
Steam cutter materials
Thickness of the steam cutter
4.2 - 6 or 8.4
Aluminized polyester
0.0037'' (0.095mm)
Certifications
AREAS OF APPLICATION
DOCUMENTATION
Frequently Asked Questions
What is Ventflex ASA and in what areas of application is it used?
Ventflex ASA is a semi-rigid insulated ventilation duct, designed for heating, air conditioning and ventilation systems. Its flexibility and tightness allow maximum performance in these areas.
What are the main features of Ventflex ASA?
The Ventflex ASA is made from aluminium or stainless steel, with a 7-facet seal, ensuring perfect sealing and reduced energy consumption thanks to its reduced coefficient of friction.
Is it possible to order Ventflex ASA in specific sizes or lengths?
Yes, Ventflex ASA is available in standard sizes from 3" to 24", with lengths from 10' and compression capability up to 45'' for aluminum. Non-standard sizes can be manufactured upon request.
