Ventflex ASPG - Flexible Ventilation - Semi-rigid Aluminum or Stainless Steel
The Ventflex ASPG is a semi-rigid ventilation duct made of aluminum or stainless steel, perforated for acoustic attenuation, with thermal insulation R4.2, R6, and R8.
PRODUCT DETAILS
-
Constructed from a single strip of aluminum or 316 stainless steel, without the addition of adhesive.
-
Perforated on 20% of its surface to reduce noise generated by moving air and the mechanical system.
-
Corrosion resistant and offers a lower coefficient of friction than standard fabric ducts.
-
Bend radius: 1 to 1.5 times the diameter of the duct.
-
Standard length of 10' with possibility of compression to 48''.
CURVATURE DIAMETER
1-1.5 times the duct diameter.
USES
-
Ventilation for heating and cooling systems.
-
Reduction of energy consumption of ventilation systems .
MATERIALS
Aluminum or stainless steel
Available diameters
3", 4", 5", 6", 7", 8", 9", 10", 12", 14", 16", 18", 19", 20", 22".
Available materials
Flame development
Smoke development
Maximum air speed
Positive operating pressure
in continuous mode
Negative operating pressure
in continuous mode
Operating temperature range
Aluminum
<25
<50
4000 ft/min
15" of WC
6" of WC
-40°F to 250°F
Thickness of flexible pipe
0.005'' (0.13mm)
Stainless steel
R coefficient of the insulation
Steam cutter materials
Thickness of the steam cutter
4.2 - 6 or 8
Polyethylene
0.003'' (0.076mm)
DOCUMENTATION
AREAS OF APPLICATION
Frequently Asked Questions
What is Ventflex ASPG and in what areas of application is it used?
The Ventflex ASPG is a semi-rigid perforated duct, designed to reduce noise in ventilation systems. It is ideal for environments requiring low noise levels.
What are the main features of the Ventflex ASPG?
The Ventflex ASG is made of aluminum or stainless steel with a 7-facet seal, ensuring a perfect seal and a reduced coefficient of friction for better energy efficiency.
Is it possible to order the Ventflex ASPG in specific sizes or lengths?